Workswell GIS-320
The Workswell GIS-320 gas imaging system is the perfect solution for gas leak detection. Its unique pairing of both thermal and digital cameras makes it a versatile instrument. The GIS-320's infra-red camera can be used to identify the escape of specific gases, as well as their presence in the air. It can also enhance environmental safety testing. This positions the Workswell unit as an aid in environmental protection, as well as in human health and safety efforts.
FLIR is the exclusive global distributor of the Workswell GIS-320 Thermal by FLIR optical gas imaging payload for unmanned aerial systems, unmanned ground vehicles, and mobile platforms.
Essential tool for gas leak detection
Workswell GIS 320 is a state-of-the-art thermal imaging camera that is designed for use in the field of gas leak detection. This high-quality camera uses advanced infrared technology to detect and visualize gas leaks in real-time, making it an essential tool for professionals working in the gas industry.
The Workswell GIS 320 features a high-resolution thermal imaging sensor that can detect gas leaks from a distance of up to 100 meters. The camera also comes equipped with a high-performance lens that allows for clear and detailed imaging, even in low-light conditions.
One of the key features of the Workswell GIS 320 is its ability to detect and visualize multiple gases at the same time. This means that professionals can quickly and accurately identify the source of a gas leak, even when multiple gases are present.
The GIS-320 can detect a wide spectrum of gases which are invisible to the naked eye. Moreover, the GIS-320 has a high sensitivity, with a detection range of between 3.2 – 3.4 µm. Itś absolutely perfect for gas leak detection.
The Workswell GIS 320 is also highly customizable, with a range of software options available that allow professionals to tailor the camera to their specific needs. This includes advanced features such as automatic alarm detection and notification, as well as customizable reporting tools that allow for easy data analysis.
Overall, the Workswell GIS 320 is a highly advanced thermal imaging camera that is designed to meet the needs of professionals working in the gas industry. With its advanced features and high level of customization, it is an essential tool for anyone involved in gas leak detection and prevention.
DJI 600
Ready-to-Fly Combo
The GIS-320 thermal camera is fully compatible with the DJI M600 Pro drone, and both are available in a ready-to-fly combo.
Ensconced in a rugged case of lightweight aluminum. What’s more, the most sensitive component of the entire system, the thermal camera lens, is protected by a replaceable protective cap made of germanium.
For those looking for a hassle-free solution, the GIS-320 thermal camera and DJI M600 Pro drone are both available in a ready-to-fly combo package.
The combination of the GIS-320 thermal camera and the DJI M600 Pro drone is a game-changer in the world of aerial thermal imaging. With the ability to capture high-resolution thermal imagery from a safe distance, this powerful duo is ideal for a wide range of applications, from industrial inspections and surveillance to search and rescue missions.
With its ease of use, superior performance, and exceptional value, this package is sure to provide a seamless and satisfying experience.
Fully Compatible with an RC Controller
The Workswell GIS-320 is the ideal gas leak detection solution when paired with unmanned air vehicles (drones/UAV systems). Both can be fully operated with one standard RC controller.
Digital Fullspectrum Visible Camera
The Workswell GIS-320 contains a digital camera (full spectrum).
Its resolution is 1920 x 1080 pixels and it has 10x optical zoom, which aids in the inspection of specific areas.
Images and Video Recording
The GIS-320 can also take non-radiometric images and video for later processing.
Its data is stored on a 64 GB internal disk or flash drive.
Cooled Quantum Detector
The cooled quantum detector’s resolution is 320×240 pixels, making it a powerful addition to this thermal camera.
The detector operates at the very low temperature of -200°C, which increases its temperature sensitivity to 10mK.
HW communication, control ports & interfaces
S.BUS
CAN bus (DJI M600 and A3 controller compatible)
Ethernet (RJ 45 with RTPS streaming and control signals transmission option)
MavLink – Provides a wide range of standard and custom commands for controlling the thermal camera during the flight.
GPS connection potential
External trigger
CANbus & UART serial communication
Weight and dimensions
The camera's dimensions are 201 x 150 x 101 mm, <1.6 kg (7.9 x 5.9 x 3.97 in), <3.5 lb.
No Calibration Required
The GIS-320 ability to detect gases is not influenced by any calibration process and will not degrade over time.
FLIR MWIR thermal core used in GIS-320 camera have been independently tested and deemed compliant with the EPA’s NSPS 40 CFR part 60, subpart OOOOa sensitivity standard for optical gas imaging equipment.
Testing was performed by the National Physical Laboratory (NPL), which confirmed the the core is capable of imaging a gas that is half methane/half propane at a concentration
of 10,000 ppm at a flow rate of ≤60g/hr from a quarter inch diameter orifice.
Do you have any questions?
Please don’t hesitate to contact me if you need further information.
Gallery
Video
Additional information
| Cooled Camera | |
| Resolution | 320 x 240 pixels |
| Temperature ranges | Optional temperature ranges (integration time) -20°C…+350°C |
| Temperature sensitivity | 0.010 °C (10 mK) |
| Frequency | 30Hz |
| Spectral range | 3.2 – 3.4 μm, Cooled InSb FPA detector, powered by FLIR |
| Lenses | 24° x 18° or 14,5° x 10.8° |
| Focus | Automatic Motorized focusing, minimum focus distance 0.5 m |
| Zoom | Digital zoom 1 – 4x in infrared image |
| HSM – High Sensitivity mode | Yes |
| Special GAS detection mode | Yes |
| Temperature level adjustments | Yes, automatic, manual or moving span |
| Digital Visible Camera | |
| Resolution | 1 920 x 1 080 pixels (Full HD) |
| Focus and zoom | Autofocus, 10x optical zoom with vibration compensation |
| Remote control & Video output | |
| Digital interfaces | S.BUS, CAN bus (for DJI control and GPS coordinates), USB 2.0 (data transfer, video recording, FW update), MavLink, CANbus & Command Control Protocol – serial camera control, External GPS connectivity & External trigger |
| Video output | Digital HDMI 720p (1280 x 720px) |
| Memory and data recording | |
| Image recording | Radiometric JPEG Radiometric TIFF Non-Radiometric Digital camera JPEG Full HD |
| Video recording (IR, Vis) | Radiometric full-frame IR recording (raw data recording) |
| GPS tagging | MavLink, External GPS, A2 or A3 DJI compatible via CAN bus interface |
| Memory | Internal disk, Direct saving to external Flash drive |
| Measurement functions | |
| Measurement functions | Max temperature, Min temperature, Centre temperature |
| File format | Saved in radiometric (raw) format in JPEG, TIFF and video WSEQ |
| Following gases are detected | |
| Gases (200+ gases detectable) | Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, m-xylene, Butane, Methane, Propane, Ethylene and Propylene |
| Power supply & dimensions | |
| Input supply voltage | 10 – 28 VDC, consumption 18 W |
| Operating temperature | -15°C to +50°C |
| Dimensions and weight | 201 x 150 x 101 mm, <1.6kg (7.9 x 5.9 x 3.97 in), <3.5 lb |