Gimbal Pixy WE
for WIRIS ENTERPRISE
Gimbal PIXY WE for Wiris Enterprise
Workswell WIRIS® Enterprise is a Multi-sensor Camera that has been specifically designed for use with unmanned aerial vehicles (UAV/UGV), or drones.
The WIRIS OS and integrated sensors provide unprecedented aerial imaging capabilities for a range of commercial drone applications, including thermal inspections, security applications, firefighting, geological, archeological, forestry studies, ecological and environmental research.
Gimbal Pixy WE for WIRIS Enterprise is the gimbal tailored for specially for Workswell thermal camera, making the flawless combination ready to be used for all unmanned vehicles.
Are you interested?
Easy integration into all drone solutions
Gimbal Pixy WE for WIRIS Enterprise camera work together perfectly with built-in functions for aerial imaging capabilities, ideally for thermal inspections, security applications, firefighting, geological, archeological, and forestry studies, as well as ecological and environmental research.
Pixy WE can be intergrated with DJI M300/M350 (via gPort) or drones using Pixhawk/ Cube Pilot FC.
- 1. Operation Modes
- ON/OFF
- Lock mode
- Follow mode
- Mapping mode
- 2. Temperature Sensor
- 3. Gremsy Specialized Gimbal Drive Motors with Encoders
- 4. Micro USB connection
- 5. Gremsy Advanced 32-Bit high performance ARM microprocessor
- 6. S-Bus/Spektrum/PPM Receiver Supported
- Static current: 400mA (@12V)
- Dynamic current: 800mA (@12V)
- Locked motor current: Max 4.0A (@12V)
- 0°C ~ 50°C
- 500g
- 157(D) x 117(W) x 168(H)
- 14-52VDC
- Micro USB, CAN, UART (Gimbal MAVLink Protocol), PPM, Sbus, Spektrum, Bluetooth, Micro HDMI
- Windows XP or above; Mac OS X 10.9 or above
- iOS 7.1 or above; Android 4.3 or above
- Pan axis control: +330° to -330°
- Tilt axis control: +135° to -45°
- Roll axis control: +50° to -90°
- Pan axis control: +330° to -330°
- Tilt axis control: +135° to -45°
- Roll axis control: ± 45°
built for Wiris series camera M300/M350 RTK integration
Specifically made for WIRIS Enterprise. Pixy WE fully supports powerful capabilities of these thermal sensors to play in the field of precision agriculture, mapping, surveying and inspection.
No balancing nor tuning required, PixyE gives you the superfast setup time within seconds, ready to plug and play with your drone easily.
Click for more information about PIXY WE on Gremsy website
WIRIS Enterprise
Workswell WIRIS® Enterprise is a Multi-sensor Camera that has been specifically designed for use with unmanned aerial vehicles (UAV/UGV), or drones. The WIRIS OS and integrated sensors provide unprecedented aerial imaging capabilities for a range of commercial drone applications, including thermal inspections, security applications, firefighting, geological, archeological, forestry studies, ecological and environmental research.
High temperature range up to 1500°C
Thermal camera image resolution 1266x1010
Precise laboratory calibration ±2 % or ±2 °C
Range finder up to 1500m detection
30x optical RGB zoom with night vision mode
Visual camera resolution 16MPX
Top tier specifications
Workswell WIRIS® Enterprise has been designed first and foremost as an inspection camera. Its thermal camera is equipped with a LWIR microbolometric sensor with 640 × 512 px resolution (in the 7.5 – 13.5 μm range) and the Super resolution mode functionality providing an option to have the final thermogram in the 1 266 x 1 010 px resolution.
The first RGB camera comes with 16Mpx resolution.,which is designed primarily for high-resolution imagery and terrain mapping. Second RGB camera comes with Full HD (1920 x 1080 px) resolution and, most importantly, it provides an absolutely unrivaled optical ultrazoom 30x in real-time, which is suitable for security applications.
resolution
IP66 & rugged construction
Industrial inspections are often carried out in demanding environments. As a result, there is a high risk that inspection cameras will be damaged during the course of their normal use. That’s why the WIRIS Enterprise is coming with IP66 rating – Complete protection from dust, oil, and other non-corrosive material also waterproof against rain, snow even from powerful jets of water.
Ensconced in a rugged case of lightweight aluminum. What’s more, the most sensitive component of the entire system, the thermal camera lens, is protected by a replaceable protective cap made of germanium.
HW communication, control ports & interfaces
S.BUS
CAN bus (DJI M600 and A3 controller compatible)
Ethernet (RJ 45 with RTPS streaming and control signals transmission option)
MavLink – Provides a wide range of standard and custom commands for controlling the thermal camera during the flight.
GPS connection potential
External trigger
CANbus & UART serial communication
Thermolab software
Thermolab is a software for detailed analysis of thermograms from thermal and infrared cameras, allowing the user to edit the data into different formats and create clear reports from the thermograms.
All standard data analysis functions are available in the program (temperature at a point, minimum and maximum of the area, temperature profile, zoom, temperature scale change, color palette, emissivity, etc.) as well as extended functions such as GPS location of the image and the ability to display RGB digital images.
WIRIS OS
Workswell built the WIRIS OS to ensure the security of its WIRIS systems while enhancing their diagnostic capabilities.
The WIRIS OS is simply the only software that enables the maximum utilization of the WIRIS Pro’s hardware.
Together, Workswell’s hardware and software offer advanced measurement functions that cannot be replicated by any other product on the market.